![]() ![]() Hoses, clamps, and other dredge accessories are not included.Ī suction nozzle works in a similar fashion to a power jet except instead of being attached directly to the header box it is attached at the far end of the material hose. Other sizes of suction nozzles are available from the drop down menu. ![]() Also makes sure your pump engine has enough power to move that size material at your preferred depth. When ordering a nozzle make sure the inlet diameter matches your pump fitting size. A 2 inch pressure hose is easily secured to the nozzle with a 2 inch threaded coupling. #ke-sn2515 outlet size: 2.5" inlet size: 1.5"Įxample: A ke-sn32 dredge nozzle (measures 3" x 2") - the suction nozzle outlet measures 3 inches and will work with our 3 inch suction hose. #kesn2 outlet size: 2.0" inlet size: 1.25" Prices start at $135 for a 1.5" Suction Nozzle. Without getting into an explanation of friction loss of your ten foot, one inch diameter pressure hose, you will require 33.5 psi at the pump to provide the 30 psi at the eductor.Ideal for shallow water dredging - these dredge suction nozzles are precision manufactured by Jobe and Keene from thin-wall plated steel tubing with machined orifices to create maximum suction pressure. ![]() Refer to a conversion chart to find conversion of decimal inched to "regular" inches which is fractionally larger than 1/2".Īt 30 psi the 1/2' eductor will require 41 g.p.m. ![]() 264 IMPORTANT: this is the radius of the eductor size - NOT the bore size! Now for the tricky part: convert backwards and finally come up with a bore diameter.Įductor size is. inchesĮxample: 2 inch jet Ģ inch jet = 3.14 x (1" (radius of jet) Squared)ģ.14 sq inches x 7% (.07) =. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |